FEMOX Pedestals Powered by BERA

SpiraPave®

What is SpiraPave®?

SpiraPave® made of 100% recycled polypropylene eliminates need for bedding sand and/or of brick or metal piers for installation of raised pavers or decking. It eliminates efflorescence and prevents algae growth on pavers, facilitates rapid surface drainage and easy accessibility to waterproofing membranes and concealed services. It also provides a ventilation break that reduces heat and sound transmission to habitable space below.

SpiraPave® is a new generation pedestal for paver and bearer support consisting of top and bottom components paired to create pedestals of different heights, each individually able to step up or down in 1mm increments for precise height adjustments. The pedestals collectively allow uninterrupted progressive height increase from 12 mm to 119 mm.

SpiraPave® may be used with a combination of one or more accessories including a slope corrector which can be placed either on top or at the bottom of the pedestal to enable compensation up to 5%. Slope corrector at the bottom enables the pedestal to be perpendicular thus maintaining stability and compressive strength.

SpiraPave® low minimum height of 12 mm makes it ideal for installations where conventional height adjustable pedestals are generally too high to be used.

Benefits:

  • Minimum height of 12 mm for discrete adjustments
  • Precise 1 mm increments from 12 — 119 mm
  • Slope corrector 0-5% (SC) at the bottom or top allows pedestal to be perfectly upright, as low as 17 mm
  • Bearer holder (BH) suitable for bearers from 35-50 mm and 50-80 mm quickly and easily installed
  • Mini base plate for secure fixation to the pedestal
  • High compressive strength of 25 kN
  • Made of 100% recycled polypropylene and fully recyclable
  • Resistant to moulds, algae, alkali and bitumen
  • Perfect drainage and ventilation​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​

VersiJack®

What is VersiJack®?

VersiJack® made of 100% recycled polypropylene eliminates need for bedding sand and/or of brick or metal piers for installation of raised pavers or decking. It eliminates efflorescence and prevents algae growth on pavers, facilitates rapid surface drainage and easy accessibility to waterproofing membranes and concealed services. It also provides a ventilation break that reduces heat and sound transmission to habitable space below.

VersiJack® is a new generation pedestal for paver and bearer support consisting of wide range of components to cater to create different heights requirements and for precise height adjustments. The pedestals collectively allow uninterrupted progressive height increase from 37 mm to 1016 mm.

VersiJack® may be used with a combination of one or more accessories including a slope corrector which can be placed either on top or at the bottom of the pedestal to enable compensation up to 10%. Slope corrector at the bottom enables the pedestal to be perpendicular thus maintaining stability and compressive strength.

VersiJack® basic pedestal height can be increased to above 1000 mm using only 3 extenders, thus providing significant cost savings for pedestal heights above 500 mm.

Benefits:

  • Maximum height of 1016 mm with only 3 extendersPrecise increments from 37 — 1016 mm
  • Slope corrector (SC) at the bottom 0-5% or top 0-10% pedestal to be perfectly upright
  • Bearer holder (BH) suitable for bearers from 35-50 mm and 50-80 mm quickly and easily installed
  • Locking ring for fixation of adjusted height
  • High compressive strength of up to 15 kN
  • Made of 100% recycled polypropylene and fully recyclable
  • Resistant to moulds, algae, alkali and bitumen
  • Perfect drainage and ventilation

VersiPave®

What is VersiPave®?

VersiPave® made of 100% recycled polypropylene eliminates need for bedding sand and/or of brick or metal piers for installation of raised pavers with inconsistent. It eliminates efflorescence and prevents algae growth on pavers, facilitates rapid surface drainage and easy accessibility to waterproofing membranes and concealed services. It also provides a ventilation break that reduces heat and sound transmission to habitable space below.

VersiPave® is a new generation pedestal for paver and bearer support consisting of top component paired with extenders to create pedestals of different heights, each individually able to step up or down in 1mm increments for precise height adjustments. The pedestals collectively allow uninterrupted progressive height increase from 24 mm to 105 mm.

VersiPave® unique features is i.e. the ability to be separated into halves or quarters enabling easy and fast pavement along wall edges and also around or into corners. SpiraPave also comes with adjustable chocks enabling compensation in thickness of individual pavers.

Benefits:

  • Minimum height of 24 mm for discrete adjustments
  • Precise 1 mm increments from 24 — 105 mm
  • Half and quarter separation for wall and corner solutions
  • High compressive strength of 25 kN
  • Made of 100% recycled polypropylene and fully recyclable
  • Reusable, suitable for temporary paving or retrofitting
  • Resistant to moulds, algae, alkali and bitumen
  • Perfect drainage and ventilation

DOWNLOAD

Select language below to download catalogue SpiraPave®

NL
EN

Select language below to download catalogue VersiJack®

NL
EN

Select language below to download catalogue VersiPave®

NL
EN

PRODUCT GALLERY

PROJECTS

ГДЕ КУПИТЬ?

НАЙТИ ДИЛЕРА